A. SPECIFICATION
- Rumah chamber :
- Konstruksi Body : Stainless steel 304
- Chamber product SS 316L# 3mm lubang Ø 3mm Ex-Japan
- Kapasitas Chamber 60 kg
- Electro Motor 3 Kw Ex-Japan
- Gear Box type 120 Ex-Japan
- Variable speed (Inverter) Ex-Japan
- Blade atau pembalik product 6 posisi system knock down + adjuster
- Pengarah product outlet (lidah pengarah) - Rumah Filter (Inlet Air) :
- Konstruksi Body : Stainless steel 304 # 1,5 mm
- Ectro Motor blower 2 Hp,1400 rpm Teco Ex-Taiwan
- Variable speed (Inverter) Ex-Japan
- Ducting SS 304 # 1,5 mm,ukuran disesuaikan
- Heppa Filter 24 x 24 x 12“ (H13) JAF
- Medium Filter 24 x 24 x 12” (F9) JAF
- Pre Filter 24 x 24 x 2” (G4) JAF
- Exchanger SS 304
- Butterfly valve Ø 6” (manual) - Rangkaian Steam :
- Rangkaian Pemipaan MS Shedule 40 Ø 3/4”
- Solenoid valve Ø 3/4”
- Strainer Ø 3/4”
- Pressure Reducing valve Ø 3/4”
- Pressure gauge Ø 3/4”
- Safety valve Ø 3/4”
- Steam strap Ø 3/4”
- Globe valve Ø 3/4” - Rangkaian Pompa Peristaltic :
- Konstruksi Body : Stainless steel 304 # 1,5 mm
- Electro motor ½ Hp Ex-Taiwan
- Variable speed (Inverter) Ex-Japan
- Spray Gun 2 unit Ex-Iwata Japan (dapat di adjust untuk posisi sprayer)
- Selang silicone Ø ½ “
- Air regulator Ex Japan
- Air Solenoid Ex Japan (Menutup compressor saat mati listrik)
- System Pump Peristaltic terpisah dari system chamber - Unit Tangki Homogen volume + 50 liter :
- Chamber Tanki SS 316L# 2mm
- Electro motor ½ Hp1400 rpm Teco Ex-Taiwan
- Blade mixer type propeller 2 buah
- Variable speed (Inverter) Ex-Japan
- Roda PU Ø 3” - Panel Control System Manual :
- Display digital RPM : Chamber, outlet air, inlet air
- Display Timer untuk proses coating
- Display Themperature : Inlet and outlet
- Display + Themperature control untuk suhu chamber
- Knop speed : Chamber, inlet air dan out air
- Selector Switch on-off (Power)
- Selector Switch Chamber
- Selector Switch revese Chamber
- Selector Switch Blower
- Selector Switch Exhaust
- Selector Switch Steam Timer
- Switch E-Stop
- Switch Alarm - Unit Exhaust (Out Air) :
- Konstruksi Body : Stainless steel 304 # 1,5 mm
- Electromotor 2 Hp, 1400 rpm type centrifugal cap. 3500 cfm Teco Ex-Taiwan
- Variable speed (Inverter) Ex-Japan
- Filter Bag
- Pre Filter : 24 x 24 x 2” (G4) JAF
- Medium Filter : 24 x 24 x 12” (F7) JAF
- Hepa Filter : 24 x 24 x 12“ (H14) JAF
- Ducting SS 304 # 1,5 mm,ukuran disesuaikan
- Nozzle + Pipa aerosol untuk akses Integrity test
- Roda PU Ø 4” ( 2 bh swivel brake , 2 bh rigid castor)
- Shacking manual
- Butterfly valve Ø 6” (manual) - Skop Pekerjaan (Instalasi) :
- Instalasi utility diluar gedung dengan modifikasi kaca : Potong kaca jendela ± 50cm, sebagai space untuk jalur pipa ducting exhaust dan inlet.
- Mengganti kaca dengan plate SS tebal 2mm, frame disesuaikan.
- Memindah 1 unit outdoor AC dan Pipa Instalasi, untuk space utility
- Memindah Box maghehelic Exhaust pan
- Memindah canopy magnehelic Exhaust pan
- Membuat canopy untuk melindungi exhaust dan inlet modul filter dari hujan dan matahari
#Download Quotation
B. MACHINE UNIT
C. DESCRIPTION
B. MACHINE UNIT
C. DESCRIPTION
Coating Film Machine was created by using the latest technology coating method using a spray gun. The results go through a process stage which is a combination / combination of the liquid mixing process, pumped through a spray gun with certain temperatures and conditions. In brief, the process of Indocota Coating Film capacity of 60 kg can be explained as follows: The volume of air needed is generally taken from the work area, then passed through the initial filter (Pre Filter), medium filter, hepa filter and finally Exchanger (heating source). Before entering the chamber product, the tablets / caplets to be coated / weighed / checked as needed and just entered the chamber product.
Clean air is passed through ducting to the top, thus agglomeration will occur in the presence of a binding agent used for coating / coating.
Important parts that include additions:
1. Automatic Temperature Control for temperature monitoring
2. The air volume control is controlled by a damper
3. Control liquid with a peristaltic pump for the spraying process
For the spraying process used two spray guns that are installed right in the middle of the drying chamber. The spray gun can be set vertically and horizontally which is transferred through a silicone hose with pressure from a peristaltic pump that can be regulated by adjusting the rotation speed. Lined material, which may consist of one or more materials inserted into a homogeneous mixer tank. Then the temperature of the incoming air is set between 50-70oC so that during the spraying time the product drying process is short, except when spraying is done using organic solvents, the temperature is set as low as possible.
Coating film consists of several tools including the coating chamber machine itself, the inlet filter, outlet filter, peristaltic pump and liquid mxing tank. These four tools are a unit that cannot be separated in the coating process. The parameters in the product coating process to be coated include the following:
Distance spray gun with bed tablet Atomizing and water pattern Pan pressure Pan speed (pan coating speed), Spray rate Water inlet, temperature Water outlet, temperature Solvent evaporation speed Volume of spraying particles Humidity Total drying capacity Total air volume Adhesion of particles to the gun surface Peristaltic pump flow The speed and duration of spraying
D. PRICE
To get machine prices and special offers according to specifications you can contact US CONTACT or download the offer linked below as a basic reference.
To get machine prices and special offers according to specifications you can contact US CONTACT or download the offer linked below as a basic reference.
